Mini Excavator 7.5k
Get in and start working – with the EZ36, performance meets maximum efficiency. This zero tail excavator is ideal if compact dimensions are needed. Minimal rear overhang makes working along walls and other obstacles an easy task. The machine features intuitive operation using a joystick, display and jog dial, as well as a comfortable working environment. This leaves the operator in full control of the application. Configurable to meet a customer’s requirements, the EZ36 offers dealer-installed options, including a hydraulic thumb and rotating beacon.
Get in and start working – with the EZ36, performance meets maximum efficiency. This zero tail excavator is ideal if compact dimensions are needed. Minimal rear overhang makes working along walls and other obstacles an easy task. The machine features intuitive operation using a joystick, display and jog dial, as well as a comfortable working environment. This leaves the operator in full control of the application. Configurable to meet a customer’s requirements, the EZ36 offers dealer-installed options, including a hydraulic thumb and rotating beacon.
Comfortable, fully glazed cab
- The large, fully glazed and tiltable cabin with roof window offers the operator an optimal 360° visibility of his work area. This gives the operator a good view of his working area, colleagues and any dangers. Meanwhile, available despite this.
- It can be easily disassembled for service and repair work. All hydraulic functions of the excavator meanwhile remain available despite this.
Optimized drive concept
- The well thought-out drive concept with optimized engine-pump management allows quick and precise control of the excavator. This makes up to 15 percent faster work cycles possible. The available engine versions are low in consumption and require no exhaust after-treatment.
VDS Vertical Digging System
- The vertical digging system compensates for slopes of up to 15 degrees, making it possible to vertically excavate on a slope. This is not only ergonomic for the operator, but it also saves time and also means less excavated material.
- Up to 25 percent material and time savings when excavating and filling. Safe working and higher stability in sloping spaces.
- The same swing power over 360 degrees allows fatigue-free work with the seat position remaining the same.
Zero Tail
- When space is limited: Pivot safely, even in the tightest of spaces or right next to the wall - with the Zerotail excavator without rear overhang, no problem.
- Optimal working in limited working conditions, high maneuverability and time savings are guaranteed.
8 large tie-downs
- Six large tie-downs on the vehicle chassis and two on the dozer blade make loading and transport easy and safe.
- Die Ösen sind perfekt platziert für eine sichere Befestigung der Maschine und sie sind auch für große Haken gut geeignet.
Additional information
| Fuel Type |
|---|
Features
Engine
22,2 kw Diesel Engine(Stage 3a)
- Cylinders: 3
- Cylinder Capacity: 100.2 in³
- Effective Power: 29.8 hp
- Nominal Engine Speed: [Information Missing]
- Starter Battery Voltage: [Information Missing]
- Stroke: 3.5 in
- Bore: 3.5 in
- Engine Type: Diesel engine
- Exhaust-Gas Limit: EPA3
- Engine Manufacturer: Yanmar
- Engine Designation: 3TNV88
18,2 kW Diesel engine(Stage 5)
- Cylinders: 3
- Cylinder Capacity: 100.2 in³
- Effective Power: 24.4 hp
- Nominal Engine Speed: [Information Missing]
- Stroke: 3.5 in
- Bore: 3.5 in
- Engine Type: Diesel engine
- Fuel: Diesel EN 590
- Exhaust-Gas Limit: EU Stage V
- Engine Manufacturer: Yanmar
- Engine Designation: 3TNV88
Dimensions
- Height with Cab: 98.15 in / 101.38 in
- Total Height with Rotating Beacon: 103.5 in / 106.7 in
- Height of Dozer Blade: 14.1 in / 14.1 in
- Width of Cab: 38.6 in / 38.6 in
- Width of Travel Gear: 68.9 in / 68.9 in
- Width of Dozer Blade: 68.9 in / 68.9 in
- Transport Length: 216.82 in / 216.27 in
- Digging Depth Max., Short Shovel Arm: 127.93 in / 124.98 in
- Digging Depth Max., Long Shovel Arm: 137.78 in / 134.83 in
- Piercing Depth Max., Short Shovel Arm: 83.65 in / 80.69 in
- Piercing Depth Max., Long Shovel Arm: 92.98 in / 90.03 in
- Piercing Height Max., Short Shovel Arm: 194.05 in / 197.16 in
- Piercing Height Max., Long Shovel Arm: 200.23 in / 203.19 in
- Dumping Height Max., Short Shovel Arm: 131.44 in / 134.39 in
- Dumping Height Max., Long Shovel Arm: 137.47 in / 140.42 in
- Digging Radius Max., Short Shovel Arm: 208.74 in / 207.64 in
- Digging Radius Max., Long Shovel Arm: 219.93 in / 218.51 in
- Max. Reach at Ground Level (Short Shovel Arm): 212.41 in / 211.89 in
- Max. Reach at Ground Level (Long Shovel Arm): 222.26 in / 221.78 in
- Tail Swing Radius: 36.76 in / 36.76 in
- Boom Offset Max. (to Center of Bucket Right Side): 26.79 in / 26.79 in
- Boom Offset Max. (to Center of Bucket Left Side): 25.61 in / 25.61 in
- Stacking Height Max. (Dozer Blade Above Surface): 15.48 in / 15.48 in
- Digging Depth Max. (Dozer Blade Below Surface): 19.9 in / 19.9 in
- Length Travel Drive: 81.24 in / 81.24 in
- Max. Swivel Angle (Arm System to the Left): 70° / 70°
- Max. Swivel Angle (Arm System to the Right): 45° / 45°
- Boom Swing Radius Right: 55° / 55°
- Boom Swing Radius Left: 70° / 70°
Standard Components
Engine
- Engine Type: Liquid-cooled Yanmar diesel engine
- Model: 3TNV88F
- Cylinders: 3
- Cooling Type: Liquid cooled
- Emissions Compliance: T4F
- Auto Idling System: Yes
General
- Rubber Track: 300 mm
- Dozer Blade: Included
- LED Work Light: Mounted on lifting arm
- Toolkit: Includes grease press and operator’s manual
- Watertight, Lockable Document Box: Included
Hydraulics
- Pumps: Dual variable displacement pump and double gear pump (42.5 L/min + 42.5 L/min + 26.3 L/min + 11.3 L/min)
- Aggregate Power Level Regulation: Yes
- Hydraulic Pilot Control: Via joystick operation
- Valve Control: According to ISO, DIN, SAE, PCSA, and EURO standards
- Auxiliary Hydraulic Connections: For two directions of travel, mounted on dipper stick
- Automatic 2-Speed Transmission: 2 travel speeds automatically switched, 2nd gear manually lockable
- Hydraulically Servo-Controlled and Damped: Foot pedals and forward + reverse travel lever
- Hydraulic Oil Cooler: Yes
- Enlarged Unpressurized Return Line: For various attachments
- Proportional Control for AUX I: Discharge volume adjustable via potentiometer
Security
- EquipCare Telematics Hardware: Subscription ready
Editions
Edition E3601: Canopy, Long Dipper, HQC
- Long Dipperstick: Included
- Thumb Mounting Bracket: Included
- Hydraulic Quick Coupler (HQC): With Easy Lock control system
- Work Lights: Front (LED)
- Auxiliary Hydraulics: Two directions with direct to tank setting
- Flat Faced Couplers: On dipper
- ISO/SAE Control Pattern Change Over Valve: Included
- Rear Counterweight: 337 lbs (153 kg)
- Drive Signal: Travel alarm
Edition E3605: Canopy, Long Dipper, HQC, Angle Blade
- Angle Dozer Blade: 4-way (25° right/left) with float position
- Long Dipperstick: Included
- Thumb Mounting Bracket: Included
- Hydraulic Quick Coupler (HQC): With Easy Lock control system
- Work Lights: Front (LED)
- Auxiliary Hydraulics: Two directions with direct to tank setting
- Flat Faced Couplers: On dipper
- ISO/SAE Control Pattern Change Over Valve: Included
- Rear Counterweight: 337 lbs (153 kg)
- Drive Signal: Travel alarm
Edition E3602: Canopy, Long Dipper, HQC
- Cabin: With AC, 1 door, split front window
- Radio Ready: Wiring and speakers installed
- Long Dipperstick: Included
- Thumb Mounting Bracket: Included
- Hydraulic Quick Coupler (HQC): With Easy Lock control system
- Work Lights: Front and rear (LED)
- Auxiliary Hydraulics: Two directions with direct to tank setting
- Flat Faced Couplers: On dipper
- ISO/SAE Control Pattern Change Over Valve: Included
- Rear Counterweight: 337 lbs (153 kg)
- Drive Signal: Travel alarm
Edition E3606: Cabin, Long Dipper, HQC, Angle Blade
- Cabin: With AC, 1 door, split front window
- Radio Ready: Wiring and speakers installed
- Angle Dozer Blade: 4-way (25° right/left) with float position
- Long Dipperstick: Included
- Thumb Mounting Bracket: Included
- Hydraulic Quick Coupler (HQC): With Easy Lock control system
- Work Lights: Front and rear (LED)
- Auxiliary Hydraulics: Two directions with direct to tank setting
- Flat Faced Couplers: On dipper
- ISO/SAE Control Pattern Change Over Valve: Included
- Rear Counterweight: 337 lbs (153 kg)
- Drive Signal: Travel alarm
Technical Data
Mechanical – output details
- Superstructure Turning Speed: 9.5 kg/m²s
- Travel Speed: 2.9 m/h
- Break Out Force (Bucket): 7,868.3 Anz
- Break Out Force (Lift Arm): 4,743.5 Anz
Mechanical Details
- Length: 216.9 in
- Operating Weight (Min.-Max.): 8,196.8 – 10,901.9 lb
- Digging Depth (Max.): 137.7 in
- Width: 68.9 in
- Height: 106.7 in
Engine
- Cylinders: 3
- Cylinder Capacity: 100.2 in³
- Inclined Position Max.: 30°
- Effective Power: 24.4 hp
- Nominal Engine Speed: 2,400 rpm
- Battery Capacity (Nom. Value): 71 Ah
- Engine Type: Diesel engine
- Fuel: Diesel EN 590
- Exhaust-Gas Limit: EU Stage V
- Engine Manufacturer: Yanmar
- Engine Designation: 3TNV88
Hydraulic
- Operating Pressure (Hydraulics): 3,480 lb/h
- Flow Rate Max.: 31.7 l/min
- Operating Pressure (Slewing Gear): 195 bar
- Hydraulic Pump: Axial piston and 2 gear pumps
Operating Fluids
- Cooling Fluid Volume: 5.3 g/cm³
- Hydraulic Fluid Volume: 65 g/cm³
Shipping and Storage
- Shipping Weight: 7,780.1 lb
Chassis
- Traction Drive: Axial piston motor with RGU
